+- Sim Racing System (https://www.simracingsystem.com)
+-- Forum: Sim Racing System (https://www.simracingsystem.com/forumdisplay.php?fid=1)
+--- Forum: Sim Racing System (https://www.simracingsystem.com/forumdisplay.php?fid=2)
+--- Thread: Im new and have few questions (/showthread.php?tid=8148)
Im new and have few questions - Alejandro Cortes - 04-15-2020
Hello
I have run three races and cannot find where I can find the results, the times I have done etc.
I also have doubts about ABS / TC configuration because when you reserve slot in the instructions it says that TC and ABS is 1 but then in the game you can put what you want. Can I put whatever I want or do I have to set it to 1?
I also can't find where to see my points and my statistics.
Thank you
RE: Im new and have few questions - Andrea Martelli - 04-15-2020
TC and ABS "1" means they are available. 1 means YES, 0 means NO. Then you can set them as you like.
If you check the "competition" tab on the top of the screen youcan find "current standings": there you can find results, best laps, standings.
RE: Im new and have few questions - simracingsystem - 04-15-2020
In assetto corsa, 1 means factory
RE: Im new and have few questions - Alejandro Cortes - 04-15-2020
Ok. Now im confused. If in my setup configuration i can set TC to 8 and ABS to 10, can i set it to 8 and 10 or i set it on 1?
Thx Andrea, i find results and race participations
RE: Im new and have few questions - Igor Relja - 04-15-2020
You can use whatever you like. 1 means factory ON/OFF. Meaning - if the car has them in real life, you can use them, if it doesn't you can't.
RE: Im new and have few questions - Russell Sobie - 04-15-2020
Two different variables there. One is dictating what the server settings are (1=Factory, as others have stated). The other is the value you give to TC or ABS in your setup, which can be 0 to 1, or 0 to 10, or 0 to 45... that depends on the car. What is worse is that I think (I'd love if someone knew this for sure), is that the closer you are to 1 in the setup, the MORE TC or ABS you have. The bigger the number, the less its effect. Except 0 means turn it completely off.
Ideally, the bigger the number, the more its effect, and I'd like to say that's how it actually works, but I think Kunos borked this one up. Any official knowledge on that?
RE: Im new and have few questions - James Blint - 04-16-2020
(04-15-2020, 11:59 PM)Russell Sobie Wrote: Two different variables there. One is dictating what the server settings are (1=Factory, as others have stated). The other is the value you give to TC or ABS in your setup, which can be 0 to 1, or 0 to 10, or 0 to 45... that depends on the car. What is worse is that I think (I'd love if someone knew this for sure), is that the closer you are to 1 in the setup, the MORE TC or ABS you have. The bigger the number, the less its effect. Except 0 means turn it completely off.
Ideally, the bigger the number, the more its effect, and I'd like to say that's how it actually works, but I think Kunos borked this one up. Any official knowledge on that?
Yes lower value is more intervention of TC and ABS, at 1 you have max TC for example, and 0 is turned off. Some race cars have it like that but yeah confusing in general. On the Oreca and maybe some others, it's reversed.