+- Sim Racing System (https://www.simracingsystem.com)
+-- Forum: Sim Racing System (https://www.simracingsystem.com/forumdisplay.php?fid=1)
+--- Forum: Bugs & Troubleshooting (https://www.simracingsystem.com/forumdisplay.php?fid=3)
+--- Thread: VR error - Monza Tatuss Series (FIXED) (/showthread.php?tid=10410)
VR error - Monza Tatuss Series (FIXED) - Eduardo Odriozola - 01-30-2021
The last few days I have had a problem with my VRs.
Sorry for the problems I could have caused on the track.
I hope to solve it soon, or else I will not run until it is fixed.
Greetings.
RE: VR - MONZA TATUUS SERIES - Juan Alberdi - 01-30-2021
Hope you fix it soon Eduardo. See you on track
RE: VR - MONZA TATUUS SERIES - Eduardo Odriozola - 01-31-2021
Solved.
After upgrading downgrading, putting light, IR, spotlights, youtube tuttorials and doing endless tests it has turned out changing the USB of the G27.
The glasses moved their orientation when passing the 90º turn of the steering wheel. Probably because of the input of the forcefeedbak
... so in the middle of the chicanes the car changed its view and apart from the dizziness until it did not focus it could not trace or accelerate.For some reason it interfered with the USB3 power of the glasses. I have changed it to a different USB and it no longer gives errors.
I comment on it in case anyone has this same problem.
Regards, Eduardo.
PD. Nice super clean figth Carlos
in the end you´ve won 
RE: VR error - Monza Tatuss Series (FIXED) - Eduardo Odriozola - 02-08-2021
Finally the jumps problems were resolved.
Apparently it was a malfunction with the steering wheel connectors because I run with a custom stand allone QR USB one wuth the g27.
But now, in several races, my VR has gone black.
It seemed to have been fixed with a USB Splitter to improve the power stabillity, but it has continued to fail.
The only problem is that if the screens are turned off the race is ruined. I have set up and escape button and out.
If I can solve it I will post it in case it helps someone in the community.