Hello There, Guest! Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Lotus Evora GX
#1
Any setup to improve braking on the Lotus Evora GX?
Reply
#2
Reduce the brake pressure.
TPC SimRacing driver and painter
Plank autos YouTube channel.
https://www.youtube.com/channel/UCUHSOrlVoG0AOC2Uxn-bsvQ
Reply
#3
Crappy brake pedal from Thrustmaster? Fix it with this quick DIY mod.

https://www.isrtv.com/forums/topic/16647...pedal-mod/
Tutorial on how to use Autodesk Mudbox and Adobe Photoshop to make custom liveries! https://tinyurl.com/yaetz4qz
Grab my PDash Skins (a Assetto Corsa HUD app) here: https://tinyurl.com/y95ewubz
Reply
#4
Practice too.
I'm using basic thrustmaster pedals and have no issues. Just alot of practice.



https://youtu.be/qhEFIpoXoe8

Link to my setup on YouTube.
TPC SimRacing driver and painter
Plank autos YouTube channel.
https://www.youtube.com/channel/UCUHSOrlVoG0AOC2Uxn-bsvQ
Reply
#5
Guys,
here is my race setup to this car, for Paul Ricard.... And if you allow me, here are some tips I think can make you faster with this car:
1) when braking, wait longer to make up-shifts... This helps the braking process and to avoid locking front tyres;
2) as you'll see on my setup, I have full load on front springs... This helps to push front tyres harder on the ground when braking, and make it harder to lock those tyres;
3) Be really gentle on the brake pedal... It's possible to brake hard, but even in straight line, you can't hold high pedal pressure for long... So, you have to tail-brake even in straight line... Avoid at all costs to brake hard when turning to the apex;
4) this car is nervous under bumps... Avoid them whenever is possible;
5) this is a very technical car... You have to drive it gentlely, or you'll experience lots of oversteer... Be as clean as possible with the steering wheel;
6) use the most of the track possible, to optimize straight sectors... This can improve a lot your top speed;
7) on low speed circuits, you can add front spliter... But you have to increase real wing to avoid huge oversteer on medium and high speed corners;
8) this car has a high oversteer rate under deceleration... Use high COAST value on diff setting... You'll see I use it on the maximum value... This helps a lot to avoid lose control when you release gas pedal.

Well, that's it... I hope you enjoy this setup and you can improve your laptimes... Car setup is a very particular stuff, as every driver has his driving style... But I think these tips can help everybody!!!

P.s.: I change just minor things from track to track on this setup... Basically, I made those aero changes I described above... 
P.s2: The file attachment is not working... So, I'll share the setup file content below:

[INTERNAL_GEAR_2]
VALUE=1
[INTERNAL_GEAR_3]
VALUE=2
[INTERNAL_GEAR_4]
VALUE=1
[INTERNAL_GEAR_5]
VALUE=2
[INTERNAL_GEAR_6]
VALUE=1
[INTERNAL_GEAR_7]
VALUE=7
[FINAL_RATIO]
VALUE=6

[TYRES]
VALUE=0
[PRESSURE_LF]
VALUE=15

[PRESSURE_RF]
VALUE=15

[PRESSURE_LR]
VALUE=20

[PRESSURE_RR]
VALUE=20


[FUEL]
VALUE=25

[WING_1]
VALUE=0

[WING_2]
VALUE=5


[CAMBER_LF]
VALUE=-28

[TOE_OUT_LF]
VALUE=60

[CAMBER_RF]
VALUE=-28

[TOE_OUT_RF]
VALUE=60

[CAMBER_LR]
VALUE=-10

[TOE_OUT_LR]
VALUE=-180

[CAMBER_RR]
VALUE=-10

[TOE_OUT_RR]
VALUE=-180


[DAMP_FAST_BUMP_LF]
VALUE=16

[DAMP_BUMP_LF]
VALUE=13

[DAMP_FAST_REBOUND_LF]
VALUE=41

[DAMP_REBOUND_LF]
VALUE=9

[DAMP_FAST_BUMP_RF]
VALUE=16

[DAMP_BUMP_RF]
VALUE=13

[DAMP_FAST_REBOUND_RF]
VALUE=41

[DAMP_REBOUND_RF]
VALUE=10

[DAMP_FAST_BUMP_LR]
VALUE=26

[DAMP_BUMP_LR]
VALUE=8

[DAMP_FAST_REBOUND_LR]
VALUE=20

[DAMP_REBOUND_LR]
VALUE=8

[DAMP_FAST_BUMP_RR]
VALUE=26

[DAMP_BUMP_RR]
VALUE=7

[DAMP_FAST_REBOUND_RR]
VALUE=20

[DAMP_REBOUND_RR]
VALUE=8


[DIFF_POWER]
VALUE=10

[DIFF_COAST]
VALUE=85


[BRAKE_POWER_MULT]
VALUE=100

[FRONT_BIAS]
VALUE=61

[ENGINE_LIMITER]
VALUE=100


[PACKER_RANGE_LF]
VALUE=50

[PACKER_RANGE_RF]
VALUE=50

[PACKER_RANGE_LR]
VALUE=59

[PACKER_RANGE_RR]
VALUE=59


[ARB_FRONT]
VALUE=6

[ARB_REAR]
VALUE=6

[SPRING_RATE_LF]
VALUE=130

[ROD_LENGTH_LF]
VALUE=5

[SPRING_RATE_RF]
VALUE=130

[ROD_LENGTH_RF]
VALUE=5

[SPRING_RATE_LR]
VALUE=100

[ROD_LENGTH_LR]
VALUE=15

[SPRING_RATE_RR]
VALUE=100

[ROD_LENGTH_RR]
VALUE=15



[CAR]
MODEL=lotus_evora_gx


Cheers,
Bruno
Reply
#6
Wow massive thank you for your tips and setup Bruno
TPC SimRacing driver and painter
Plank autos YouTube channel.
https://www.youtube.com/channel/UCUHSOrlVoG0AOC2Uxn-bsvQ
Reply
#7
Tongue 
Thank you very much for your advice. I hope to test your setup and enjoy the races. I will try not to win all the races  Big Grin  
Reply
#8
Thank you Bruno, you are very unselfish sharing tips and setup. I really appreciate it so much!!
Reply
#9
THX for the setup, immediately handles so much better and faster.
Reply
#10
Maybe can be useful for you, thats my race from yesterday.

https://www.youtube.com/watch?v=jzdslKhARDA
Actually Driving For NWS eSports Team
https://twitter.com/JOSE2K2
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)