Hello There, Guest! Register

Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
NR2003 App Download & Insctructions
#1
[Image: nr2003.png]
SRS NR2003 APP V1.02 (08/02/2019)

The NR2003 App allows users to register and join races held at Sim Racing System and also features skin transfer so that you can upload your customized cars and download from other users.

1 - Instructions
1.1 - Download the App from one of the following locations: 1.2 - Extract the SRS_NR2003_101.zip to NR2003s' root folder
  • If your installation is located at
    C:\Papyrus\NASCAR Racing 2003 Season
  • The SRS.exe file should be located at  
    C:\Papyrus\NASCAR Racing 2003 Season\SRS_NR2003\SRS.exe
1.3 - Execute SRS.exe and login with your SRS credentials.


2 - Requirements
2.1 - NR2003 clean Install with: 2.2 - Replace the [Communications] section from your core.ini file (located at NR2003 root) with this one:
Quote:[Communications]
alternate_ip_addr_lookup=1               ; Find IP addresses another way
bcast_listserv=                         ; IP address of race list server
bcast_listserv_port=0                   ; list server port (0 = default)
bcast_listserv_req_freq=0.000000         ; Request race list frequency
bcast_ping_disable=0                     ; Disable response to pings
bcast_send_disable=0                     ; Disable sending broadcasts
bcast_send_freq=4.000000                 ; Broadcast frequency (seconds)
disable_direct_connect=1                 ; Disable Direct Connect
disable_icmp_checking=1                 ; Don't open/check ICMP sockets
disable_ipx=0                           ; Disable IPX support
disable_modem=0                         ; Don't look for/use modems
disable_network=0                       ; Disable network support
disable_rasapi32_load=0                 ; Disable loading rasapi32.dll
disable_tcp_ip=0                         ; Disable TCP/IP support
ignore_net_read_errors=1                 ; Don't disco if error reading pkt
ignore_net_send_errors=1                 ; Don't disco if error sending pkt
ip_addr_lookup_timeout=8                 ; Timeout to find own IP address
log_server_comm_errors=0                 ; Log errors for client channels?
log_server_connect_status=0             ; Issue messages as clients connect
mem_client_send_every=1                 ; Client packet freq via memory
mem_client_send_size=532                 ; Client packet size via memory
mem_server_send_every=1                 ; Server packet freq via memory
mem_server_send_size=1028               ; Server packet size via memory
net_lan_client_send_every=1             ; Client packet freq on LAN
net_lan_client_send_size=772             ; Client packet size on LAN
net_lan_server_send_every=1             ; Server packet freq on LAN
net_lan_server_send_size=772             ; Server packet size on LAN
net_mdm_client_send_every=1             ; Client packet freq on dialup
net_mdm_client_send_size=116             ; Client packet size on dialup
net_mdm_server_send_every=1             ; Server packet freq on dialup
net_mdm_server_send_size=116             ; Server packet size on dialup
net_server_port=0                       ; Server port number (0 = default)
net_use_mdm_bandwidth_for_tcp_ip=0       ; Use modem bandwidthfor TCP/IP

2.3 - Your NR2003 profile name must match your SRS username

2.4 - Mods & tracks used are displayed at this thread - Download Link

2.5 - Some NoCD Exe files might not work.


3 - Skin Transfer Upload Process

3.1 - Once you create your custom car, you must rename it to
  • [userid]srs.[physics:cup,pta,gns,cts].car    and place it on the correct series folder.
  • If you would like to add a preview image, it should be named [userid]srs.[physics].car.jpg
  • Note: These filenames are given to you every time you register for a session.
3.2 - If you created the car with the SRS app running, you need to restart the app in order to detect it

3.3 - Register for a session, pick your skin (thumbnail shown in red) and press 'Select'. The upload should take a couple of seconds


4 - Skin Transfer Download Process

4.1 - Once you registered, all you have to do is make sure you are in the box page when the counter hits 04:00. At this point the download will begin and may take some time depending on the number of skins, size and your connection.
  • If you miss the 05:00 instant, you won't download the custom skins from other users.
Reply
#2
I keep getting Error:371 when I try to start the app. Any clue as to what the cause could be?
Reply
#3
if you are using a nocd, some don't work.
Reply
#4
(02-08-2019, 02:53 AM)simracingsystem Wrote:  if you are using a nocd, some don't work.


I'm using the origional disk
Reply
#5
does it have all the patches mentioned?
Reply
#6
(02-08-2019, 03:17 AM)simracingsystem Wrote:  does it have all the patches mentioned?\

Yes. Only thing I didnt do was a fresh install. Should I try that?
Reply
#7
also, if it was used for a league where physics were edited it won't work.
Reply
#8
I'm running into the same issue with the Error: 371 on startup. Not even a fresh install helped (I have the CD).

Driver of the Tucker Motorsports #25 chargenick1563 - NASCAR HP Cup Series Chevrolet

Check out my NR2003 offline league, the NASCAR HP Cup Series, on YouTube!

Reply
#9
I keep getting an error "WARNING! Invalid Profile!"
I'm assuming this has something to do with the NR2003 profile? I've tried every naming combination but I still get the error
Reply
#10
(02-08-2019, 06:35 AM)Kyle H Scott Wrote:  I keep getting an error "WARNING! Invalid Profile!"
I'm assuming this has something to do with the NR2003 profile? I've tried every naming combination but I still get the error

Is your in-game name the same as your SRS name?
Reply


Forum Jump:


Users browsing this thread: Frank Robinson, 1 Guest(s)