01-25-2019, 10:00 PM
(This post was last modified: 01-26-2019, 07:47 AM by Michal Janak.)
finaly RPM meter working , as it was from 12V car there was resistor on input wire so i shorted it and now RPM runs, SIMHUB is great app
https://i.servimg.com/u/f64/19/43/93/45/gauge10.jpg
try 1st changeable layout (printed little bigger ), the needle is from color paper glued to iron washer and on plastic center on gauge axe is glued magnet, so it easy and safe remove needle for easy plate change , so different skins easily possible
https://www.youtube.com/watch?v=FdhquOOPPlg&feature=youtu.be
Displays connected by SIMHUB https://i.servimg.com/u/f64/19/43/93/45/simhub10.jpg
so only Wheel is bought (G29) but rest of WH is selfmade, pedals with loadcell brake a shakeit motors, H shifter, button box, and displays wit 7segments and RPM meter
https://i.servimg.com/u/f64/19/43/93/45/gauge10.jpg
try 1st changeable layout (printed little bigger ), the needle is from color paper glued to iron washer and on plastic center on gauge axe is glued magnet, so it easy and safe remove needle for easy plate change , so different skins easily possible
https://www.youtube.com/watch?v=FdhquOOPPlg&feature=youtu.be
Displays connected by SIMHUB https://i.servimg.com/u/f64/19/43/93/45/simhub10.jpg
so only Wheel is bought (G29) but rest of WH is selfmade, pedals with loadcell brake a shakeit motors, H shifter, button box, and displays wit 7segments and RPM meter