[Andy Riches]

Here is the FF setup I'm using (as mentioned in chat.)

Disclaimer:

I know nothing about setups, I just did some driving and tweaking until I liked the feel.

I've used this at every track so far just with tyre pressure and gear ratio adjustments. Oh and I ran brake bias 1 click further to the rear on some other circuits.

Code:

[ARB_FRONT]
VALUE=16

[ARB_REAR]
VALUE=1

[BRAKE_POWER_MULT]
VALUE=100

[CAMBER_LF]
VALUE=-22

[CAMBER_LR]
VALUE=-12

[CAMBER_RF]
VALUE=-22

[CAMBER_RR]
VALUE=-12

[CAR]
MODEL=russell_alexis_mk14

[DAMP_BUMP_LF]
VALUE=1200

[DAMP_BUMP_LR]
VALUE=1950

[DAMP_BUMP_RF]
VALUE=1200

[DAMP_BUMP_RR]
VALUE=1950

[FINAL_RATIO]
VALUE=3

[FRONT_BIAS]
VALUE=53

[FUEL]
VALUE=11

[INTERNAL_GEAR_2]
VALUE=3

[INTERNAL_GEAR_3]
VALUE=9

[INTERNAL_GEAR_4]
VALUE=20

[INTERNAL_GEAR_5]
VALUE=35

[PRESSURE_LF]
VALUE=18

[PRESSURE_LR]
VALUE=17

[PRESSURE_RF]
VALUE=19

[PRESSURE_RR]
VALUE=18

[ROD_LENGTH_LF]
VALUE=13

[ROD_LENGTH_LR]
VALUE=16

[ROD_LENGTH_RF]
VALUE=13

[ROD_LENGTH_RR]
VALUE=16

[SPRING_RATE_LF]
VALUE=9

[SPRING_RATE_LR]
VALUE=21

[SPRING_RATE_RF]
VALUE=9

[SPRING_RATE_RR]
VALUE=21

[TOE_OUT_LF]
VALUE=11

[TOE_OUT_LR]
VALUE=8

[TOE_OUT_RF]
VALUE=11

[TOE_OUT_RR]
VALUE=8

[TYRES]
VALUE=1