+- Sim Racing System (https://www.simracingsystem.com)
+-- Forum: Sim Racing System (https://www.simracingsystem.com/forumdisplay.php?fid=1)
+--- Forum: Setups (https://www.simracingsystem.com/forumdisplay.php?fid=8)
+---- Forum: Assetto Corsa (https://www.simracingsystem.com/forumdisplay.php?fid=28)
+---- Thread: Ford Spec Racer Setups? (/showthread.php?tid=6927)
Pages:
1
2
RE: Ford Spec Racer Setups? - Luis Mercury - 10-05-2019
It's interesting to analyze these comments.
https://www.racedepartment.com/downloads/ford-spec-racer-for-assetto-corsa.28643/reviews?page=2
RE: Ford Spec Racer Setups? - Luis Mercury - 10-07-2019
Interesting video ... see how you drive with your feet. distribute the weight with brake and accelerator.
![[Image: B2F4j5u.png]](https://i.imgur.com/B2F4j5u.png)
RE: Ford Spec Racer Setups? - Jason Jones - 10-07-2019
I just did a race at Laguna and I think its a pretty fun car to drive. You gotta be careful on the downshifts of course, so instead of using the engine braking like you do in most cars you just need to wait a little longer for the revs to drop enough to allow for the downshift. Just trust the brakes lol. If the brakes are locking up too much for you then put the bias back another click.
This car does like to be steered with the throttle though makes for some fun drifting. My setup is fairly easy for me to catch when it steps out. Hopefully, this might help some people out.
I did 10 laps and managed a 1.45.8 in practice. In the race my fastest lap was 1.46.2. Low '46's are doable for the whole race.
[TYRES]
VALUE=0
[PRESSURE_LF]
VALUE=27
[PRESSURE_RF]
VALUE=27
[PRESSURE_LR]
VALUE=26
[PRESSURE_RR]
VALUE=26
[FUEL]
VALUE=13
[CAMBER_LF]
VALUE=-32
[TOE_OUT_LF]
VALUE=34
[CAMBER_RF]
VALUE=-32
[TOE_OUT_RF]
VALUE=34
[CAMBER_LR]
VALUE=-27
[TOE_OUT_LR]
VALUE=16
[CAMBER_RR]
VALUE=-27
[TOE_OUT_RR]
VALUE=16
[DAMP_REBOUND_LF]
VALUE=0
[DAMP_REBOUND_RF]
VALUE=0
[DAMP_REBOUND_LR]
VALUE=0
[DAMP_REBOUND_RR]
VALUE=0
[BRAKE_POWER_MULT]
VALUE=100
[FRONT_BIAS]
VALUE=54
[ARB_FRONT]
VALUE=1
[ARB_REAR]
VALUE=3
[ROD_LENGTH_LF]
VALUE=19
[ROD_LENGTH_RF]
VALUE=19