new piece of HW - Printable Version +- Sim Racing System (https://www.simracingsystem.com) +-- Forum: Sim Racing System (https://www.simracingsystem.com/forumdisplay.php?fid=1) +--- Forum: Off-Topic (https://www.simracingsystem.com/forumdisplay.php?fid=27) +--- Thread: new piece of HW (/showthread.php?tid=5232) |
new piece of HW - Michal Janak - 01-25-2019 finaly RPM meter working , as it was from 12V car there was resistor on input wire so i shorted it and now RPM runs, SIMHUB is great app https://i.servimg.com/u/f64/19/43/93/45/gauge10.jpg try 1st changeable layout (printed little bigger ), the needle is from color paper glued to iron washer and on plastic center on gauge axe is glued magnet, so it easy and safe remove needle for easy plate change , so different skins easily possible https://www.youtube.com/watch?v=FdhquOOPPlg&feature=youtu.be Displays connected by SIMHUB https://i.servimg.com/u/f64/19/43/93/45/simhub10.jpg so only Wheel is bought (G29) but rest of WH is selfmade, pedals with loadcell brake a shakeit motors, H shifter, button box, and displays wit 7segments and RPM meter RE: new piece of HW - Michal Janak - 01-26-2019 and for one of my most favorite cars Ferrari 330 p4, plate drawed in InkScape , change of plates now under 5 minutes https://youtu.be/BxdYXyZ_lPM RE: new piece of HW - Michal Janak - 02-03-2019 Ferrari F312 F1 1967 (raced many onnline seasons in GPL) https://youtu.be/dfFLXx-65OI |